Coil slitting line (USA) by Herr-Voss and Cincinnati, rated for hot- and cold-rolled and galvanized steel. This line is well maintained and operating daily. Come inspect it under power.

Specifications

• Capacity (width): 60 inch
• Maximum weight: 50,000 lb
• Input uncoiler: Cone type, driven by dual 40 HP Baldor motors; Stamco reducers were rebuilt by Unigear in 2020
• Input inside diameter: 15 to 39 in.
• Input outside diameter: Max. 72 in.
• Thickness: 0.011 in. – 0.135 in.
• Trims: Requires a minimum of 0.400 in. to 0.500 in.
• Output: Herr-Voss strand tensioner, right after the 22 ft double loop pit
• Speed reducer: 200 HP, rebuilt June 2019 by Unigear
• Control panel: Cincinnati-Forte
• Output inside diameter: 20 in.
• Output outside diameter: Maximum 72 in.
• Width tolerances: +/- 0.005 in. from 0.009 in. to 0.110 in. thick material; +/- 0.010 in. from 0.110 in.+
• Line speed (ft per min.): 570 (gear – low), 970 (gear – high), max. 1600 FPM

Notes

Prior to the Herr-Voss strand tensioner, the control panels and main components are Cincinnati-Forte.

After the tensioner, the recoiler (55,000 lb capacity) was rebuilt in 2020, with a Cincinnati-Forte 200 HP G-E DC variable-speed drive. This recoiler gear reducer was rebuilt in June 2019 by Unigear. It has a ~20" mandrel that pushes slit coils off to the turnstile and coil handling, then to the banding and palletizing stations.

The line includes two 220 KVA 3-phase transformers from 440 to 550 volts, so this unit can operate anywhere in Canada or the USA.

Shipping: as this slitting line is beside our Warehouse #4 (see Machineco.ca, page bottom), we saw it running almost daily whenever we visited our warehouse, until just a few months ago. The former operator moved to brand-new premises with some robotic equipment. We have 24/7 access to the warehouse, with two 30-ton overhead cranes and forklifts. There is good truck access indoors under the cranes.